How To Change Drive Belt On Cub Cadet Z Force

1: Make sure you prepare your Ultima zero-turn mower to be used for maintenance. The mower could be placed on a flat, level surface. The mower should be turned off, and ensure that the engine is at a cool temperature. Unlock your ignition switch, cut the ignition wire of the spark plug and then engage the brake for parking. This ensures that the engine won’t get started accidentally and inflict on you or others who are around you to harm.

To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video

2. Set the height of your mower’s deck at the lowest level.

3: Remove both belt covers. Make use of a 3/8″ wrench or socket to take the belt covers off the deck. Take out all six screws.

4. Unbolt the access panel. With the 1/4″ socket or the access tool provided in Ultima models, take off that bolt and remove it from the.

5:Your spindle’s pulleys can be removed simply by detaching your spindle from the pulleys. To release the tension from the belt, turn the idler pulley arm inward with a wrench.

6. Take the pulleys off the idler as well as the PTO clutch. Utilizing a 9/16″ socket and wrench, loosen the bolts, but don’t remove the bolts that hold the idler pulley in place.

7. Installation of the belt replacement. Install the belt according to the diagram of routing.

8. The belt should be routed around and around the PTO clutch.

9.Route your belt via the idler pulleys. With a 9/16″ wrench and socket tighten both looser pulley bolts.

10. The belt is routed around spindle pulleys. Make use of the 9/16″ wrench or socket to loosen the tension and then finish the process of routing the belt.

11: Reinstall both belt covers.

12. Install the bolt and access panel.

13: Reconnect your spark plug wires

Move the ratchet towards the left side in order to loosen the belt tension for a deck of 46 inches. If you have a Cub Cadet mower has a deck that is 50 inches then set a 3/8″ drive ratchet to tighten the belt, then insert it through the hole of the bracket for the idler. It should be turned to the right part of the lawnmower to release the belt tension. Install your belt covers back on the pulleys that are outside. The cutting deck is then moved back underneath the mower. The deck belt around the pulley of the engine and fix with the belt by a keeper rod. Put the click pin in the rod that hangs from the deck in front. PTO Belt (or power take-off belt) is part of a pulley mechanism that controls the blades of your lawnmower. It operates by using the electronic clutch system that is in the engine.

ncG1vNJzZmijqaG8r7zOsJylpF6YvK57x6iuZqyfYrCprc2gnGacop7DpnnBnqOtZZ%2BjeqTBwWaampyVqXq7ecWoqZydXw%3D%3D